## basys3_bringup.xdc: constraints for bringup.sv on a Digilent Basys 3. ## Pin numbers taken from Digilent's Basys-3-Master.xdc. ## 100 MHz clock set_property -dict { PACKAGE_PIN W5 IOSTANDARD LVCMOS33 } [get_ports clk] create_clock -add -name sys_clk_pin -period 10.00 -waveform {0 5} [get_ports clk] ## Centre push-button (btnC) set_property -dict { PACKAGE_PIN U18 IOSTANDARD LVCMOS33 } [get_ports btn] ## LED0 to LED2 set_property -dict { PACKAGE_PIN U16 IOSTANDARD LVCMOS33 } [get_ports {led[0]}] set_property -dict { PACKAGE_PIN E19 IOSTANDARD LVCMOS33 } [get_ports {led[1]}] set_property -dict { PACKAGE_PIN U19 IOSTANDARD LVCMOS33 } [get_ports {led[2]}] ## The button is asynchronous to clk and goes through a two-flop ## synchroniser, and the LEDs are viewed by eye, so neither needs I/O timing. set_false_path -from [get_ports btn] set_false_path -to [get_ports {led[*]}] ## Configuration bank voltage settings (from the Digilent master file) set_property CONFIG_VOLTAGE 3.3 [current_design] set_property CFGBVS VCCO [current_design]