Digital electronics · Free course

FPGA Design and Implementation

Learn to design digital hardware for FPGAs, verify it in simulation, meet timing and run it on a real board.

4 lessons2 h 45 min totalStarts at beginner levelFree, no sign-upUpdated 20 November 2026

FPGAs let you build custom digital hardware without fabricating a chip. You describe the circuit in a hardware description language, a tool maps it onto a grid of configurable logic, and seconds later the hardware is running on your desk. This course takes you through that whole process.

The course starts with how an FPGA is built, because good HDL code follows from knowing what the tools can map it onto. It then covers writing synthesizable Verilog, SystemVerilog and VHDL, verifying designs in simulation, meeting timing, and crossing clock domains safely. It ends with a complete UART design taken from RTL to a programmed board.

Who it is for

Electronics and computer engineering students, embedded software engineers moving into hardware, and working engineers who want a structured refresher.

Hardware

No board is required for most lessons; every example runs in a free simulator. For the hardware steps, any low-cost board works, for example a Digilent Basys 3 (AMD Artix-7), a Terasic DE10-Lite (Intel MAX 10) or an iCEBreaker (Lattice iCE40).

Software

Icarus Verilog or Verilator for simulation, plus the free edition of your vendor's tool (AMD Vivado ML Standard, Intel Quartus Prime Lite) or the open-source Yosys and nextpnr flow.

Syllabus

3 modules · 4 lessons · 2 h 45 min

Frequently asked questions

Do I need an FPGA board to take this course?

No. Every lesson can be completed in a free simulator. A board is only needed if you want to run the UART project on real hardware, and any low-cost development board will do.

Should I learn Verilog or VHDL first?

Either works, and the concepts transfer directly. The course uses SystemVerilog for most examples because it is common in industry and in open-source tools, and shows VHDL equivalents for the core constructs.

What background do I need?

Basic digital logic (gates, binary numbers, flip-flops) and some experience with any programming language. Lesson 1 and the glossary cover the terms you need.

Is the course free?

Yes. All lessons, quizzes and code downloads are free to use.